Rheem Continuous Gas Hot Water Heaters

The Rheem Continuous Gas Hot Water heaters are currently by far one of New Zealands most popular and trendy hot water systems. In particular the model running on LPG bottles. We install almost as many continuous gas hot water heaters on LPG per year as all the rest of the hot water systems put together.

Models are available in both Natural Gas and LPG.

THEY’RE HARD TO BEAT!

*INSTALLED PACKAGES FROM ONLY $2287 INC GST
 
Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

Rheem 26 Gas Hot Water Heaters | Endless Hot Water | LPG

UPGRADE from the Rheem 26, to the Rheem 27 Continuous Flow Gas Hot Water Heater for FREE!

If you would like to have the bigger unit, you can get a FREE UPGRADE NOW!

How do you get your FREE Upgrade?

All you need to do is let the Regency Plumbing office team know you would like to upgrade to the Rheem 27 Continuous Gas Hot Water Heater, when you make your booking for your new hot water system.

Right now you’ll pay the same price as the Rheem 26 packages which you can read more about further down the page. Its up to you, but as they say, “BIGGER IS BETTER”, and when it’s FREE! why wouldn’t you.

Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

*Terms and Conditions Apply. Please note that you only get the free upgrade, when you purchase one of the Rheem 26 packages.

continuous gas hot water heater

Happy Customers Of Regency Plumbing Auckland, who we installed a Rheem 27 Continuous Gas Hot Water Heater for

  1. Regency Plumbing, Auckland replaced our leaking hot water cylinder with a gas hot water heater. They were very professional and kept us informed all the time. They were also well priced. We can’t speak highly enough of the service we received. Will definitely use them again.
  2. I have use Regency 3 times so far, installing gas hot water system, fixing leaked pipe, repairing gas heater. I am very happy with their services. They turned up on time, and get jobs done quick and up to standard. The price they charged is reasonable as well.
  3. Took advantage of their ad for replacing our hot water cylinder with a Rheem system. What a great buy and a great job. Great communication with the office and great work from Hayden. We are having them back for more work.
rheem 27 continuous gas hot water cylinder - regency plumbing

Key Features of the Rheem 27 Continuous Flow Gas Hot Water Heaters

  1. Rheem Continuous Flow Gas Hot Water Heaters deliver endless hot water that never runs out.
  2. The Rheem Continuous Flow Gas Hot Water Heaters are a high tech advanced water heating system designed for NZ homes.
  3. They come complete with a 5.8 star energy efficiency rating.
  4. They are a high or mains pressure system.
  5. Also space (storage space) in a home is in demand so getting rid of the old cylinder, gaining a storage cupboard, and having the new gas hot water unit on the exterior wall is fantastic.
  6. Just open up the hot tap and the hot water will flow out for as long as you would like it to. For the family of girls who just love to shower all day long, this has got to be a winner.

Plus you can fit a Rheem Eziset – allowing you to control the hot water in your home from up to 10 mobile devices

Auckland Plumbers - Regency Plumbing Eziset Rheem Remote

Do you know much about Gas Hot Water Systems in Auckland… If not, this information may help you!

Have you ever considered heating your hot water with gas? If you haven’t, it is well worth doing the math. In most cases offering a far more efficient hot water heating system than most electric options.

Gas hot water systems are very popular, and a cost effective way to heat your water.

There are (2) common types of gas hot water heaters.

  1. Gas Storage Cylinders
  2. And the popular Continuous Flow Gas Hot Water Heaters

Regency Plumbing, Auckland is a recommended installer of all Rheem Hot Water Systems, and we most probably install more hot water systems every year than any other plumbing business in Auckland.

rheem 27 continuous gas hot water heater

Rheem 27 Continuous Flow Gas Hot Water Heaters

The Continuous Gas Hot Water heaters are currently by far one of New Zealand’s most popular and trendy hot water systems, and in particular the models running from LPG bottles. Over the course of the year, we install almost as many of these gas hot water heaters as all the rest of the hot water systems put together.

The Rheem 27 models are available in both Natural Gas and LPG, and will normally cost you upwards of $1800 just for the Rheem 27 unit, however right now the team at Regency Plumbing Auckland are offering you a special package deal to have a new Rheem 27 Continuous Flow Gas Hot Water system supplied and installed in your home from just $3287 inc GST. That is exactly the same price as you’d pay for the Rheem 26 model.

So, right now it’s FREE, no extra to upgrade to the BIG Rheem 27!

A FREE UPGRADE! in models, from 26 to 27 litres per minute.

You can read the full details below in the Rheem 26 upgrade packages.

*rheem 27 from ONLY $3287 inc GST

 

Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

*Terms and Conditions Apply. The above price of $3287 Inc GST is for the NG (Natural Gas model), the LPG model is an extra $100, so a total of $3387 Inc GST. A full list of general terms are listed in each package deal.

RHEEM 27 LPG GAS HOT WATER HEATER - endless hot water

Rheem 26 Continuous Flow Gas Hot Water Heater – Straight Swap

We’ve put together a special package, to supply and install a brand-new continuous flow gas hot water heater for you.

It’s sometimes very hard to put everything into exact words, what’s planned for, what’s included, and what we’ll be doing, however I have tried my best to make it clear for you,

In a general overview your new hot water system will include:

  • Disconnection of your existing hot water system, if required,
  • A new Rheem Integrity 26 continuous flow gas hot water heater,
  • Plumbing work required to complete the installation,
  • Gas fitting required to complete the installation,
  • Gas certification for your job,
  • And on completion we will test the hot water system to ensure it’s ready for use.

So, if you take advantage of this great package deal and all the savings, right now you’ll pay just $2287 including GST for the complete package.

So, it’s a great deal we have for you right now. The full retail price of this job is normally $2,551.54, so therefore – this package includes a total savings of over $250! A great deal, but only available at this price for a LIMITED TIME ONLY!

Rheem 26 Continuous Flow Gas Hot Water Heater – Straight Swap

*NOW ONLY $2287 inc GST

 

  • Natural Gas,
  • and LPG

Both models are the same price for a straight swap package.

In summary:

Plumbing, gas fitting, and removal of the old hot water heater, is all included.

*This price is for a straight swap only, based on the new unit being the same set out, and fitted in the same position, as the existing gas hot water unit.

*Please note that we have not allowed for an electrician in this price, as mostly we do not require one. The switches for these units are generally a 3 pin plug, however if your existing unit is hard wired in, we will also need an electrician, which would be extra.

Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

This is a complete package, however there are potentially a couple of issues we can encounter on installations like this which are not included as standard in our set packages as they’re only occasionally required, so we find it best and most appropriate to just charge them as an extra on those jobs.

* Our general hot water exclusions include:

  • No allowance has been made for any other subtrades work unless it is listed clearly in the details,
  • Should you “the customer” decide for any reason you no longer wish to proceed with the job after we have started to travel to site. A full refund will be given excluding our minimum service charge and restocking fee of $200 plus GST. It is recommended that any cancellations if required are made the day prior, if possible,
  • This quote has been based on us completing the work within 1 site visit on the same day. Any additional site visits required that are out of our control will be charged at our regular rates,
  • We sometimes find when we come to properties that they are not fitted with pressure limiting valves. We recommend that a limiting valve is fitted to every property to protect the pipe work and fixtures from over pressurization. Should your property not have one, we are able to supply and install one for you for an additional cost of $250 plus GST.
  • As you have an existing gas installation, on arrival to site we will first test for soundness, to ensure you don’t have any gas leaks, or faults prior to us starting our work. This is what is required of us as gasfitters before we commence any new work or upgrades. Should there be any issues, we will point them out to you, and arrange for repairs to be completed to ensure we can complete the job, test system, and leave your installation safe, and of course provide the appropriate certificate of compliance. Extra’s would apply if additional work were required.
  • This is a general list of exclusions and possibly the whole list will not directly relate to your job, however we feel it’s always best to be clear upfront before we start work to avoid any unwanted surprises!

But to be very clear – in all cases, if we come across any issues outside of the quoted value – we will notify you right away, we will discuss with you, we will provide estimated additional cost to make good, or alter, and it will be agreed upon by you and us before we proceed, eliminating the shock of a significant, or any price inflation from the original quoted value.

How long does a job like this take?

In most cases a standard hot water system upgrade will all be completed within the day.

We’re very focused on a quality outcome, and sometimes if you rush too much the quality is compromised. It’s better to take a little extra time than be disappointed, but it would be very rare to not be able to complete the installation within the same day we started job.

So, what’s the plan from here:

We really look forward to completing this project for you, and we hope to hear from you very soon. If you need to chat about anything, just give us a call, we are here to help and make your job easier.

If you’re happy with everything already, all you need to do is liaise with our team to establish a time frame that works for you to get it done, arrange a deposit of 50%, and your date will be locked in for you.

And just one final reminder for your own peace of mind:

If you’re not already confident we’re the best choice to complete your job, I encourage you to read more about us on our website and check out our fabulous reviews online. We have a fantastic team of plumbers, gasfitters, and other contractors to carry out your work, we do an amazing job, we take care of everything for you, providing you great service, a job completed professionally, on time, to budget, and HASSLE FREE!

HERE’S A RECENT REVIEW OF A HOT WATER SYSTEM WE INSTALLED:

I had Regency Plumbing to install Gas Hot Water at my property and I have absolutely nothing bad to say about them. All the way from dealing with Annaliese to the guys on the day, job all done and tidy, so professional. Highly recommend this company!! Thanks guys

Carol Sweeney

Rheem 26 Continuous Flow Gas Hot Water Heater – Straight Swap

*now ONLY $2287 inc GST

 

  • Natural Gas,
  • and LPG

Both models are the same price for a straight swap.

Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

Rheem 26 Gas Hot Water Heaters | Endless Hot Water | LPG

Rheem 26 Continuous Flow Gas Hot Water Heater – LPG – UPGRADE OPTION

We’ve put together a special package price to supply and install a brand-new continuous flow gas hot water heater for you.

It’s sometimes very hard to put everything into exact words, what’s planned for, what’s included, and what we will be doing, however I have tried my best to make it clear for you,

In a general overview your new hot water system will include:

  • Disconnection of your existing hot water system if required,
  • A new Rheem 26 LPG continuous flow gas hot water heater which will be fitted on the exterior wall, and in the location, which is most suitable,
  • As your new hot water unit is the LPG model, we’ve also allowed for set up of the LPG regulator, and pig tails for connection to your (HIRED) LPG gas bottles,
  • Any valves required to complete the installation of your new unit,
  • Any plumbing work required to complete the installation,
  • Any new pipework, fittings, and connections, as required,
  • Any gas fitting required to complete the installation,
  • And gas certification appropriate for your job,
  • Plus, we’ve included an electrician to complete a basic switch and electrical connection,
  • And on completion we will test the hot water system to ensure it is ready for use.

PLUS: if you upgrade your old cylinder right now, we’ll give you a $150 TRADE IN on your old hot water cylinder, brass valves, and scrap pieces of pipework, to help us keep the replacement cost of your new one to a minimum. (of course, this only applies if we take away your old cylinder, valves, and scraps of pipework)

So, if you take advantage of this great package deal and all the savings, right now you’ll only pay $3387 including GST for the complete package.

Rheem 26 Continuous Flow Gas Hot Water Heater – LPG – UPGRADE OPTION

*NOW ONLY $3387 INC GST

 

So, it’s a great deal we have for you right now. The full retail price of this job is normally $5,350.46, so therefore – this package includes a total savings of almost $2000! A great deal, but only available at this price for a LIMITED TIME ONLY!

And to sweeten the deal for you… even that little bit more…

If you sign up to “Rockgas” for your new LPG bottled gas supply through Regency Plumbing, you will get your first refill bottle of LPG FREE! Saving you approximately another $100.

You will be delighted… GUARANTEED!

Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

In summary:

Plumbing, gas fitting, electrical, and removal of the old cylinder and valves, is all included.

This is a complete package, however there are potentially a couple of issues we can encounter on installations like this which are not included as standard in our set packages as they’re only occasionally required, so we find it best and most appropriate to just charge them as an extra on those jobs.

* SPECIAL NOTES:

  • On any jobs that we have allowed to complete the electrical work for you, in relation to the job we are doing, should the electrician deem it to be unsafe, or non-compliant with current regulations, and therefore will not be able to issue a code of compliance certificate, upgrades will be required. This will cost extra over and above our quotation for basic electrical work normally required on a job like this, but after all it is for your safety, so worth getting it sorted while we’re there. This could be the wiring, the switches, the fuses, RCD circuits, or even the switch board itself.
  • Should any of the old plumbing pipework at your property be the old black plastic piping, which is well known to be problematic, and prone to bursting randomly which has caused some major damage for customers in the past, or even old, galvanized pipe, we can remove it and upgrade it for you while we’re there to give you the peace of mind your plumbing is durable and watertight for the future. This would be extra, over and above the package price.
  • If you already have a low-pressure hot water system, you’ll be aware of the poor performance you get from it, particularly in the shower. This of course will be no better with your new replacement cylinder, so we highly recommend upgrading to a mains pressure hot water system. New mains pressure hot water systems start from about $2987 and go up from there depending on what option you choose. Many people, in fact most people who don’t have mains pressure already choose to upgrade. We can discuss the options with you.
  • Should you choose to upgrade to mains pressure hot water, from low pressure, occasionally we find the old tapware, particularly shower mixers don’t always work very well, or are noisy with a new high pressure hot water system, so if you’re upgrading from low pressure, you may need to either modify or upgrade the existing shower mixers. This is not included in our standard quotes as it’s quite rare now that this is required, however we can arrange a solution to the problem for you should there be an issue once we test the new system. If you’re replacing your shower anyway, then obviously there won’t be any issue with the shower mixer.
  • And finally, if any unforeseen issues or circumstances arise outside of our control that cause the job to be delayed, held up, or prolonged for any reason, no penalties can be claimed against Regency Plumbing.

* Our general hot water exclusions include:

  • No allowance has been made for any other subtrades work unless it is listed clearly in the details,
  • Should you “the customer” decide for any reason you no longer wish to proceed with the job after we have started to travel to site. A full refund will be given excluding our minimum service charge and restocking fee of $200 plus GST. It is recommended that any cancellations if required are made the day prior, if possible,
  • This quote has been based on us completing the work within 1 site visit on the same day. Any additional site visits required that are out of our control will be charged at our regular rates,
  • We have only made allowance to run up to 10m of Dux Secura hot and cold-water pipework from the new water heater location to the water connection points. Should we be required to extend the water supplies further than this there will be an additional charge of $25 per meter. This will be added to the final bill on completion of the job. 
  • We sometimes find when we come to properties that they are not fitted with pressure limiting valves. We recommend that a limiting valve is fitted to every property to protect the pipe work and fixtures from over pressurization. Should your property not have one, we are able to supply and install one for you for an additional cost of $250 plus GST.
  • Should you require a new flue or roof flashing due to the old one breaking, coming apart, or the roof flashing slipping when we fit new cylinder this will be charged as an additional cost. Most of the time this is not required though, so we have not included it in the price.
  • As you have an existing gas installation, on arrival to site we will first test for soundness, to ensure you don’t have any gas leaks, or faults prior to us starting our work. This is what is required of us as gasfitters before we commence any new work or upgrades. Should there be any issues, we will point them out to you, and arrange for repairs to be completed to ensure we can complete the job, test system, and leave your installation safe, and of course provide the appropriate certificate of compliance. Extra’s would apply if additional work were required.
  • We have only made allowance to run the new gas supply for up to 10m of pipework from the new water heater location to connection point. Should we be required to extend the gas supply further there will be an additional charge of $25 per meter. This will be added to the final bill on completion of the job.
  • And sometimes we can’t get the old cylinder out due to it being built in with shelves. If your cylinder is built in, or surrounded in shelves, not allowing us to easily replace the cylinder, extras would be charged for any building related work. This could be for refitting shelves, refitting door, or even more in-depth building work in some cases.
  • This is a general list of exclusions and possibly the whole list will not directly relate to your job, however we feel it’s always best to be clear upfront before we start work to avoid any unwanted surprises!

But to be very clear – in all cases, if we come across any issues outside of the quoted value – we will notify you right away, we will discuss with you, we will provide estimated additional cost to make good, or alter, and it will be agreed upon by you and us before we proceed, eliminating the shock of a significant, or any price inflation from the original quote.

How long does a job like this take?

In most cases a standard hot water system upgrade will all be completed within the day.

We are very focused on a quality outcome, and sometimes if you rush too much the quality is compromised. It’s better to take a little extra time than be disappointed, but it would be very rare to not be able to complete the installation within the same day we started job.

So, what’s the plan from here:

We really look forward to completing this project for you, and we hope to hear from you very soon. If you need to chat about anything, just give us a call, we are here to help and make your job easier.

If you’re happy with everything already, all you need to do is liaise with our team to establish a time frame that works for you to get it done, arrange a deposit of 50%, and your date will be locked in for you.

And just one final reminder for your own peace of mind:

If you’re not already confident we are the best choice to complete your job, I encourage you to read more about us on our website and check out our fabulous reviews online. We have a fantastic team of plumbers, gasfitters, and other contractors to carry out your work, we do an amazing job, we take care of everything for you, providing you great service, a job completed professionally, on time, to budget, and HASSLE FREE!

HERE’S A RECENT REVIEW OF A HOT WATER SYSTEM WE INSTALLED:

I had Regency Plumbing to install Gas Hot Water at my property and I have absolutely nothing bad to say about them. All the way from dealing with Annaliese to the guys on the day, job all done and tidy, so professional. Highly recommend this company!! Thanks guys

Carol Sweeney

Rheem 26 Continuous Flow Gas Hot Water Heater – LPG – UPGRADE OPTION

*NOW ONLY $3387 INC GST
 
Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

rheem continuous gas hot water heater
Rheem 26 Gas Hot Water Heaters | Endless Hot Water | LPG

Rheem 26 Continuous Flow Gas Hot Water Heater – NG – UPGRADE OPTION

We’ve put together a special package price to supply and install a brand-new continuous flow gas hot water heater for you.

It’s sometimes very hard to put everything into exact words, what’s planned for, what’s included, and what we will be doing, however I have tried my best to make it clear for you,

In a general overview your new hot water system will include:

  • Disconnection of your existing hot water system if required,
  • A new Rheem 26 NG continuous gas hot water heater which will be fitted on the exterior wall, and in the location, which is most suitable,
  • Any valves required to complete the installation of your new unit,
  • Any plumbing work required to complete the installation,
  • Any new pipework, fittings, and connections, as required,
  • Any gas fitting required to complete the installation,
  • And gas certification appropriate for your job,
  • Plus, we’ve included an electrician to complete a basic switch and electrical connection,
  • And on completion we will test the hot water system to ensure it is ready for use.

PLUS: if you upgrade your old cylinder right now, we’ll give you a $150 TRADE IN on your old hot water cylinder, brass valves, and scrap pieces of pipework, to help us keep the replacement cost of your new one to a minimum. (of course, this only applies if we take away your old cylinder, valves, and scraps of pipework)

So, if you take advantage of this great package deal and all the savings, right now you’ll only pay $3287 including GST for the complete package.

Rheem 26 Continuous Flow Gas Hot Water Heater – NG – UPGRADE OPTION

*NOW ONLY $3287 INC GST

 

So, it’s a great deal we have for you right now. The full retail price of this job is normally $4,708.71, so therefore – this package includes a total savings of over $1400! A great deal, but only available at this price for a LIMITED TIME ONLY!

You’ll be delighted, GUARANTEED!

In summary:

Plumbing, gas fitting, electrical, and removal of the old cylinder and valves, is all included.

Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

This is a complete package, however there are potentially a couple of issues we can encounter on installations like this which are not included as standard in our set packages as they’re only occasionally required, so we find it best and most appropriate to just charge them as an extra on those jobs.

* SPECIAL NOTES:

  • On any jobs that we have allowed to complete the electrical work for you, in relation to the job we are doing, should the electrician deem it to be unsafe, or non-compliant with current regulations, and therefore will not be able to issue a code of compliance certificate, upgrades will be required. This will cost extra over and above our quotation for basic electrical work normally required on a job like this, but after all it is for your safety, so worth getting it sorted while we’re there. This could be the wiring, the switches, the fuses, RCD circuits, or even the switch board itself.
  • Should any of the old plumbing pipework at your property be the old black plastic piping, which is well known to be problematic, and prone to bursting randomly which has caused some major damage for customers in the past, or even old, galvanized pipe, we can remove it and upgrade it for you while we’re there to give you the peace of mind your plumbing is durable and watertight for the future. This would be extra, over and above the package price.
  • If you already have a low-pressure hot water system, you’ll be aware of the poor performance you get from it, particularly in the shower. This of course will be no better with your new replacement cylinder, so we highly recommend upgrading to a mains pressure hot water system. New mains pressure hot water systems start from about $2987 and go up from there depending on what option you choose. Many people, in fact most people who don’t have mains pressure already choose to upgrade. We can discuss the options with you.
  • Should you choose to upgrade to mains pressure hot water, from low pressure, occasionally we find the old tapware, particularly shower mixers don’t always work very well, or are noisy with a new high pressure hot water system, so if you’re upgrading from low pressure, you may need to either modify or upgrade the existing shower mixers. This is not included in our standard quotes as it’s quite rare now that this is required, however we can arrange a solution to the problem for you should there be an issue once we test the new system. If you’re replacing your shower anyway, then obviously there won’t be any issue with the shower mixer.
  • And finally, if any unforeseen issues or circumstances arise outside of our control that cause the job to be delayed, held up, or prolonged for any reason, no penalties can be claimed against Regency Plumbing.

* Our general hot water exclusions include:

  • No allowance has been made for any other subtrades work unless it is listed clearly in the details,
  • Should you “the customer” decide for any reason you no longer wish to proceed with the job after we have started to travel to site. A full refund will be given excluding our minimum service charge and restocking fee of $200 plus GST. It is recommended that any cancellations if required are made the day prior, if possible,
  • This quote has been based on us completing the work within 1 site visit on the same day. Any additional site visits required that are out of our control will be charged at our regular rates,
  • We have only made allowance to run up to 10m of Dux Secura hot and cold-water pipework from the new water heater location to the water connection points. Should we be required to extend the water supplies further than this there will be an additional charge of $25 per meter. This will be added to the final bill on completion of the job. 
  • We often find when we come to properties that they are not fitted with pressure limiting valves. We recommend that a limiting valve is fitted to every property to protect the pipe work and fixtures from over pressurization. Should your property not have one, we are able to supply and install one for you for an additional cost of $250 plus GST.
  • Should you require a new flue or roof flashing due to the old one breaking, coming apart, or the roof flashing slipping when we fit new cylinder this will be charged as an additional cost. Most of the time this is not required though, so we have not included it in the price.
  • As you have an existing gas installation, on arrival to site we will first test for soundness, to ensure you don’t have any gas leaks, or faults prior to us starting our work. This is what is required of us as gasfitters before we commence any new work or upgrades. Should there be any issues, we will point them out to you, and arrange for repairs to be completed to ensure we can complete the job, test system, and leave your installation safe, and of course provide the appropriate certificate of compliance. Extra’s would apply if additional work were required.
  • We have only made allowance to run the new gas supply for up to 10m of pipework from the new water heater location to connection point. Should we be required to extend the gas supply further there will be an additional charge of $25 per meter. This will be added to the final bill on completion of the job.
  • And sometimes we can’t get the old cylinder out due to it being built in with shelves. If your cylinder is built in, or surrounded in shelves, not allowing us to easily replace the cylinder, extras would be charged for any building related work. This could be for refitting shelves, refitting door, or even more in-depth building work in some cases.
  • This is a general list of exclusions and possibly the whole list will not directly relate to your job, however we feel it’s always best to be clear upfront before we start work to avoid any unwanted surprises!

But to be very clear – in all cases, if we come across any issues outside of the quoted value – we will notify you right away, we will discuss with you, we will provide estimated additional cost to make good, or alter, and it will be agreed upon by you and us before we proceed, eliminating the shock of a significant, or any price inflation from the original quote.

How long does a job like this take?

In most cases a standard hot water system upgrade will all be completed within the day.

We are very focused on a quality outcome, and sometimes if you rush too much the quality is compromised. It’s better to take a little extra time than be disappointed, but it would be very rare to not be able to complete the installation within the same day we started job.

So, what’s the plan from here:

We really look forward to completing this project for you, and we hope to hear from you very soon. If you need to chat about anything, just give us a call, we are here to help and make your job easier.

If you’re happy with everything already, all you need to do is liaise with our team to establish a time frame that works for you to get it done, arrange a deposit of 50%, and your date will be locked in for you.

And just one final reminder for your own peace of mind:

If you’re not already confident we are the best choice to complete your job, I encourage you to read more about us on our website and check out our fabulous reviews online. We have a fantastic team of plumbers, gasfitters, and other contractors to carry out your work, we do an amazing job, we take care of everything for you, providing you great service, a job completed professionally, on time, to budget, and HASSLE FREE!

HERE’S A RECENT REVIEW OF A HOT WATER SYSTEM WE INSTALLED:

I had Regency Plumbing to install Gas Hot Water at my property and I have absolutely nothing bad to say about them. All the way from dealing with Annaliese to the guys on the day, job all done and tidy, so professional. Highly recommend this company!! Thanks guys

Carol Sweeney

Rheem 26 Continuous Flow Gas Hot Water Heater – NG – UPGRADE OPTION

*NOW ONLY $3287 INC GST
 
Get in touch now, and we’ll make sure you get the best possible deal!
 

CALL NOW

vulcan freeloader
vulcan freeloader - smoking, dead, time for an upgrade
Auckland Plumbers - Regency Plumbing AO12 Replacement Rheem 26 Continuous Flow Gas Hot Water Heaters
Auckland Plumbers - Regency Plumbing Vulcan Freeloader Mt Eden Replacement with Rheem 26

Testimonial for the Rheem Continuous Flow Gas Hot Water Heater

We just did an upgrade for Kavita, and this is what she had to say about it.

“The special offers at the home show in addition to the information on benefits of gas water heating prompted us to use Regency plumbing. They installed gas water heating and gas hob connection in our home with a large complex layout. Quote was given at the end of the day and within 3 working days, appointment booked and a job well done.The team at Regency was friendly and completed the job efficiently and to a very high standard. Our low pressure trickling showers have transformed to water blasters!

Thank you Regency.” Kavita, Botany Downs, Auckland

Regency Plumbing – “Turning Mediocrity into Greatness”
 

CALL US EMAIL US