Tap Repairs | Tap Replacements | New Taps and Mixers

Tap Repairs and Tap Replacements are what we do. Call the Auckland Tap Experts today, we look after all of Auckland. We also have some great specials right now on kitchen sink mixers!

One Team, Total Solution

27+ Years of Proven Expertise

Reliable 24/7 Service

Master Plumbers

Certified Gasfittiers

Licenced Drainlayers

Have you got an issue with your taps?

For new installations and tapware repairs, Regency Plumbing will be there fast to get the job done for you, offering professional advice, and advising you if the tap can be repaired, or if it would be actually more cost effective to replace the tap, or mixer. We can look after every tap in your Auckland home, or business premise.

Bathroom taps, kitchen taps, garden taps, laundry taps, hose taps, sink taps, whatever taps you have, we will quickly fix or replace them for you.

Regency Plumbing will be able to help you with your plumbing, and any new taps or mixers you may require.

Is Regency Plumbing a good choice for you?

This is what our customers are saying…

Thank you, very happy with work, nice young man, work carried out quickly and efficiently, have never used you before but will definitely use you in future… Thank you, Judy

Get in touch now, and we’ll make sure you get the best possible deal!

Which kitchen tap is best for you?

Choosing a sink mixer doesn’t need to be difficult, however there are a few considerations to make and hopefully these tips might help you.

  1. Do you have a mains pressure or low pressure hot water system? If you have mains pressure, any tap will work, but if you have low pressure, many wont, and you’ll need to be sure to buy an all pressure mixer tap, or one suitable for operating around 35kPa.
  2. What size sink do you have… if you have a very small sink, then a mixer tap with a long reaching spout could be a real pain. You end up getting wet every time you try to do the dishes.
  3. If you have a very old kitchen with just (2) taps, a hot and a cold tap which are separate, then upgrading to a faucet will be the best option most likely. A mixer will generally be very difficult to upgrade to without fitting a new sink bench as access to the pipes is often challenging.
  4. If you aren’t on a tight budget a pull out spray option if amazing. Once you’ve had a pull out spray type high spout goose neck mixer, you’ll never go back.
 

Regency Plumbing will be able to help you with your plumbing, and any new taps or mixers you may require. When you get Regency Plumbing to replace your sink mixer tap, there will be no hassle at all. We have top quality plumbers to take care of all your kitchen and laundry needs. All our work will be completed with no fuss and mess, and we’ll only charge you for the work required to complete the new sink mixer installation.

Get in touch now, and we’ll make sure you get the best possible deal!

Choosing taps for your shower

Choosing a shower mixer can be more complex as there is a lot to consider. Below are a few considerations you need to make.

  1. Do you have a mains pressure or low pressure hot water system? If you have mains pressure, any tap will work, but if you have low pressure, many wont, and you’ll need to be sure to buy an all pressure mixer tap, or one suitable for operating around 35kPa.
  2. If you have an old low pressure mixer now, you’ll need to check and see if it is equal pressure, or unequal pressure.
  3. If you have an old Felton mixer, the options are limited when it comes to upgrading.
  4. If you have an old set up and everything is in the wrong place for a new set up, you can fit a boobie plate, or dunny stainless steel plate. Check out the pictures attached. It may look like a compromise, and it is, however if funds are tight this might be the answer for you.
  5. Height is critical for shower slide sets. Often people fit them too low. It all depends on the height of the customer, however there’s nothing worse than a shower you cant get under.
  6. If you have low pressure hot water, the Halo slide shower pictured with a donut look, (a hole in the middle) is one of the best available to try and get a reasonable shower.
 

Regency Plumbing will be able to help you with your plumbing, and any new taps or mixers you may require. When you get Regency Plumbing to replace your shower taps or mixer, or shower slide set, there will be no hassle at all. We have top quality plumbers to take care of all your tapware needs. All our work will be completed with no fuss and mess, and we’ll only charge you for the work required to complete the new shower mixer installation.

Get in touch now, and we’ll make sure you get the best possible deal!

Quality Services Are Our First Priority

Google Rating Score
0 of 5
Google Reviews
0
Edit Template

Our Services

Professional Plumbing
Services Auckland

Edit Template

Plumbing Auckland

Regency Plumbing is dedicated to offering the highest quality plumbing services in Auckland, which will exceed the expectations of its clients today, and in the future.

Contact Us

Location

Plumber Auckland: 32 Elliot Street, Papakura Auckland, New Zealand

Call us Now

Social Links

Subscribe

* indicates required

©2023 All Rights Reserved